點擊圖片查看大圖
韓國三星毛織 ABS Starex BC-0130 X General Purpose;ABS Starex BC-0140 H;
| Samsung Cheil Industries Starex? BC-0130 X ABS, Unreinforced General Purpose | |||
|---|---|---|---|
| Categories: | Polymer; Thermoplastic; ABS Polymer; Acrylonitrile Butadiene Styrene (ABS), Molded | ||
| Material Notes: |
Stiff ABS material that is used for battery cases
Information provided by Samsung Cheil Industries. |
||
| Vendors: | No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material. | ||
|
|||
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.05 g/cc | 1.05 g/cc | ASTM D792 |
| Linear Mold Shrinkage, Flow |
0.0030 - 0.0060 cm/cm @Thickness 3.20 mm |
0.0030 - 0.0060 in/in @Thickness 0.126 in |
ASTM D955 |
| Melt Flow |
2.6 g/10 min @Load 5.00 kg, Temperature 200 °C |
2.6 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 113 | 113 | ASTM D785 |
| Tensile Strength at Break | 37.3 MPa | 5410 psi | 5 mm/min; ASTM D638 |
| Tensile Strength, Yield | 48.1 MPa | 6970 psi | 5 mm/min; ASTM D638 |
| Elongation at Break | 14 % | 14 % | 5 mm/min; ASTM D638 |
| Tensile Modulus | 2.35 GPa | 341 ksi | 5 mm/min; ASTM D638 |
| Flexural Strength | 70.6 MPa | 10200 psi | 2.8 mm/min; ASTM D790 |
| Flexural Modulus | 2.16 GPa | 313 ksi | 2.8 mm/min; ASTM D790 |
Izod Impact, Notched 
|
0.981 J/cm @Thickness 6.35 mm |
1.84 ft-lb/in @Thickness 0.250 in |
ASTM D256 |
|
1.18 J/cm @Thickness 3.17 mm |
2.20 ft-lb/in @Thickness 0.125 in |
ASTM D256 | |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 0.46 MPa (66 psi) |
96.0 °C @Thickness 6.40 mm |
205 °F @Thickness 0.252 in |
ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) |
86.0 °C @Thickness 6.40 mm |
187 °F @Thickness 0.252 in |
ASTM D648 |
| Vicat Softening Point | 99.0 °C | 210 °F | B/50; ISO R306 |
| 102 °C | 216 °F | B/120; ISO R306 | |
| Flammability, UL94 |
HB @Thickness 1.50 - 3.00 mm |
HB @Thickness 0.0591 - 0.118 in |
|
中山市沙泊塑料有限公司:中山PC,沙伯基礎PC,德國拜耳PC,日本帝人PC、Tel:18219005688:李生
Users viewing this material also viewed the following:
Samsung Cheil Industries Starex? HR-0370F ABS, Unreinforced Heat Resistant
Samsung Cheil Industries Starex? BF-0370 MABS, Unreinforced Scratch Resistant
Samsung Cheil Industries Starex? BC-0140 H ABS, Unreinforced General Purpose
Samsung Cheil Industries Starex? AS-0151BS ABS, Unreinforced
Samsung Cheil Industries Starex? AS-0151 ABS, Unreinforced
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們原則上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換